High End Systems Universal Controller Kullanıcı Kılavuzu Eki - Sayfa 7

Kontrolör High End Systems Universal Controller için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu Eki indirin. High End Systems Universal Controller 12 sayfaları.

Sayfayı Yazdır

Setting Master Dim and Playing a Preset (Channel Voice

Control)

Your selections for the controller's channel number or control number are used for master dim and

preset playing as summarized below:

•

Master dim: This is set using the MIDI control change function; it requires both a channel

number and a control number. The master dim level is an absolute value, not a delta (change)

value. The value of 99 corresponds to full brightness; the value of 0 corresponds to off or full

dark. More about master dim as it relates to master/slave modes of the controller is found in

the section titled "Master/Slave Modes" on page 7.

•

Playing a preset: A preset can be played back using the MIDI program change function.

Program change requires you to set only a channel number (along with a preset number).

Presets are described in Chapter 4 of the Universal controller manual.

Setting the Channel Number

A channel number is required for both master dim and preset playback.

Power ON the controller or press the

below:

Press the

button, then use the arrow keys around the

<Menu>

menu option (it will blink).

Press the Adjust 1

<Down>

different depending on whether Show Control or Channel Control has been previously saved.

Do one of the following:

•

If Channum is one of the displayed options, use the arrow keys around the

to select Channum (it will blink). Then see Step 5.

•

If Channum is not displayed, use the arrow keys around the

Control menu option if it is not already blinking. Then see Step 4.

Press the Adjust 1

<Down>

Control. Press the Adjust 1

press

. This will save your selection and return you to the Main menu. Start with

Step 2.

Press the Adjust 1

Use the Adjust 1 arrow keys to select the channel number (from 0 to 15) you wish to use, then

press

. The channel number does not need to be unique for this controller.

button to return to the Main menu, shown

DIM

READY

arrow key. This displays a list of menu options which will be

arrow key. This displays two options: Show Control and Channel

arrow key to select Channel Control (it will blink). Then

<Down>

arrow key. This displays the following menu:

MIDI CHANNEL NUM

xxx

Addendum UN-1

PAGE

001

button to select the MIDI

<Menu>

button to select the

<Menu>

button

<Menu>

Page 5