IHC suspension GM 1500 Talimatlar Kılavuzu - Sayfa 4
Otomobil Aksesuarları IHC suspension GM 1500 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. IHC suspension GM 1500 17 sayfaları. 5” rear drop- reverse hanger
Sayfayı Yazdır
IHC Suspension recommends all steps and procedures described in these instructions be performed while the
vehicle is properly supported on a two-post vehicle lift with safety jacks.
Otherwise, park vehicle on a clean flat surface and block the rear wheels for safety. Engage the parking brake.
Disconnect the vehicle power source at the ground terminal on the battery. Lock the steering wheel in the
straightforward position with the column lock or steering wheel locking device.
Raise the front of the vehicle and support with safety jack stands at each frame rail behind the lower control
IHC Suspension highly recommends that the installation of this product be performed by a professional technician
with experience working on and installing suspension products. Professional knowledge and skill will typically
yield the best installation results. If you need an installer in your area, please contact IHC Suspension Customer
Service to find one of our IHC Suspension Authorized dealers.
INSTALLATION BY A PROFESSIONAL IS HIGHLY RECOMMENDED
• A Factory Service Manual for your specific Year / Make / Model is highly recommended for reference
during installation.
• All lifted vehicles may require additional driveline modifications and / or balancing.
• A vehicle alignment is REQUIRED after installation of this product.
• Speedometer / Computer recalibration is required if changing +/- 10% from factory tire diameter.
• A vehicle lift or hoist greatly reduces installation time.
• Installation time estimates are based on an available vehicle hoist.
Vehicle must be in excellent operating condition. Repair or replace any and all worn or damaged components
prior to installation of lowering kit
INSTALLATION WARNING
arms.