iHealth BP5 Kullanıcı El Kitabı - Sayfa 4

Kan Basıncı Monitörü iHealth BP5 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. iHealth BP5 13 sayfaları. Wireless blood pressure monitor
Ayrıca iHealth BP5 için: Kullanıcı El Kitabı (17 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (5 sayfalar)

MEASUREMENT PROCEDURES

Apply the Cuff

a. Pull the cuff end through the metal loop, positioning it outward

(away from your body).

b. Place a bare arm through the cuff and position the cuff

1/2"(1-2cm) above the elbow joint.

c. Tighten the cuff and close it by pulling it towards your

body, securing it closed with the Velcro fastener.

d. While seated, place your hand palm-side up in front of you on a flat surface such as a desk

or table. Position the monitor in the middle of your arm aligned with your middle finger.

e. The cuff should fit comfortably, yet snugly around your arm. You should be able to insert one

finger between your arm and the cuff.

Remember to:

1. Make sure that the appropriate cuff size is used; refer to the cuff circumference range in

"SPECIFICATIONS".

2. Measure on the same arm each time.

3. Stay still during measurement. Do not move your arm, body, or the monitor.

4. Stay still and calm for one to one and half minutes before taking a blood pressure

measurement.

5. Keep the cuff clean. Cleaning the cuff after every 200 times of usage is recommended.

If the cuff becomes dirty, clean it with a moistened cloth. Do not rinse the monitor or cuff

with running water.

1/2"(1-2cm)

Body Posture

Sitting During Measurement

a. Be seated with your feet flat on the floor without crossing your legs.

b. Place your hand palm-side up in front of you on a flat surface such as a desk or table.

c. The middle of the cuff should be at the level of the right atrium of your heart.

Lying Down During Measurement

a. Lie on your back.

b. Place your arm straight along your side with your hand palm-side up.

c. The cuff should be placed at the same level as your heart.

Note: Blood pressure can be affected by the position of the cuff and your physiologic condition.

During measurement, press the "START/STOP" button for 2 seconds to turn off the monitor

manually.