dynarex 5606 El Kitabı & Kılavuz - Sayfa 5

Solunum Ürünleri dynarex 5606 için çevrimiçi göz atın veya pdf El Kitabı & Kılavuz indirin. dynarex 5606 8 sayfaları. Portable compressor nebulizer

surface. Be sure that you can easily reach the controls

when you are seated.

2. Gently twist the top part of the nebulizer counter-

clockwise to disassemble the nebulizer.

3. Fill the bottom section of the nebulizer with the medication

prescribed by your physician. Be sure that the cone is put

inside the bottom section.

4. Gently twist the top part clockwise to reassemble the

nebulizer. Be sure the two sections fit well.

5. Attach one end of air tube to the base of the nebulizer.

6. Attach the other end of air tube to the tube connector

located on the front of the compressor.

7. Attach mouthpiece or mask per your choice to the top

section of nebulizer.

8. Plug the power cord into an appropriate electrical outlet.

Make sure at this stage, the power switch is at "Off"

status.

9. Press power switch to begin your prescribed treatment.

Important:

The compressor motor has a thermal protector, which will

shut off the unit before the unit is overheated. When the

thermal protector shuts the unit off, please:

a. Switch off the unit.

b. Unplug the unit from the electrical outlet.

c. Wait 30 minutes for the motor to cool down before

another treatment. Make sure the air openings are not

obstructed.

10. W hen treatment is finished, shut off the unit and unplug

it from the electrical outlet.

5. CLEANING

It is recommended that the nebulizer, mouthpiece and mask

be thoroughly cleaned with hot water after each use and