iHealth Neo BP5S Kullanıcı Kılavuzu - Sayfa 9
Kan Basıncı Monitörü iHealth Neo BP5S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. iHealth Neo BP5S 14 sayfaları.
Sayfayı Yazdır
"Er0"
LED display reads
"Er1"
LED display reads
"Er2"
LED display reads
"Er3"
LED display reads
"Er4"
LED display reads
"Er5"
LED display reads
"Er6"
LED display reads
"Er7"
LED display reads
"Er8"
LED display reads
"ErA"
LED display reads
" Er"
LED display reads
an abnormal
result
Bluetooth
connection
unstable
before measurement
Fail to detect systolic pressure
Fail to detect diastolic pressure
Pneumatic system blocked or cuff
is too tight during inflation
Pneumatic system leakage or cuff
is too loose during inflation
Cuff pressure above 300mmHg
More than 160 seconds with cuff
pressure above 15 mmHg
memory accessing error
Device parameter checking error
Pressure sensor parameter error
Bluetooth communicate error
The cuff position was not correct
or it was not
properly tightened
Body posture was not correct
during testing
Speaking, moving arm or body,
being angry,
excited or nervous during test
Bluetooth
unsuccessful, monitor is
abnormal,
or
electromagnetic interference
is present
your arm or the monitor
Apply the cuff correctly and try
again
Measure
minutes. If the monitor is still
abnormal, please contact the
local distributor or the factory.
Reset monitor by pressing the
START/STOP
holding for about 10 seconds,
then
connect the mobile device
correctly and try again, If the
monitor is still abnormal, please
contact the local distributor or
the factory.
Review
instructions and retest
Review
instructions and retest
Retest
speaking or movement during
the test
Reset
Reset monitor by pressing the
connection
START/STOP
holding for about 10 seconds.
strong
Make sure the monitor and
iOS/Android device are away
from other electrical equipment.
Please see GENERALSAFETY
AND PRECAUTIONS
9 / 14
again
after
five
button
and
the
cuff
application
body
posture
when
calm;
avoid
iOS/Android
device.
button
and