High Great Hula Hızlı Başlangıç Kılavuzu - Sayfa 10

Dronlar High Great Hula için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. High Great Hula 18 sayfaları.

Install the propellers

When mounting, ensure that the gap between the bottom of the propeller cap

and the motor is no bigger than needed to insert the propeller removal tool.

Please note that the propeller blades with "75 mmR" markings

should be installed on the top left and bottom right sides of the

aircraft nose, while the propeller blades with "75 mm" markings

should be installed on the top right and bottom left sides of the nose.

Failing to follow this configuration may result in the aircraft not

being able to take off properly.

Detach the propellers

Insert the propeller removal tool between the propeller cap and the motor, press

down on the other end of the removal tool, and then remove the propeller blade.

Always detach the propellers using the propeller removal tool. DO

NOT remove the propellers by hand, or you may be seriously hurt

and may damage the motors.