High Lifter MCFFA-C1D Manuel - Sayfa 4

Otomobil Aksesuarları High Lifter MCFFA-C1D için çevrimiçi göz atın veya pdf Manuel indirin. High Lifter MCFFA-C1D 9 sayfaları. Max clearance can-am defender front forward arched control arm kit

Sayfayı Yazdır

6. Once you have the arms disconnected from the UTV, remove the factory bushings, sleeves, and ball

joints from the stock control arms. You will need to reuse these in the new kit.

7. The steps for removing and reusing your factory ball joints only applies if you purchased a kit

without ball joints preinstalled. If you purchased a kit with ball joints already installed, then

proceed to STEP 9 in the installation instructions.

NOTE: You will need a press to remove the ball joints!!