high pointe RocketRAID 840A Kullanıcı Kılavuzu - Sayfa 10

Bilgisayar Donanımı high pointe RocketRAID 840A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. high pointe RocketRAID 840A 16 sayfaları. Sata 6gb/s pci-express 3.0 x8

Sayfayı Yazdır

Highlight the target disks that you want to use, and press the Enter

key to select them. A numeral will be displayed before each

selected disk. This number designates disk order. After all of the

disks have been selected and press the ESC key to return to the

Create Menu.

Next, Use the↓arrow key to highlight the Capacity(GB) option

and press the Enter key. The total available capacity will be

displayed. Press the Enter key if you wish to use all available space.

If you wish to reserve disk space for additional arrays/single disks,

use the keyboard to input the amount of space (in GB) you wish to

set aside for this particular array, and press the Enter key.

Note: Multiple arrays can be created using the same set of hard disk

drives. The Capacity option allows you to set aside disk space that be

used to create another array, set as a spare disk, or partitioned to act as

a single disk (by the operating system).

For redundant RAID arrays (RAID 5, 50), select the Cache Policy:

Write Back – Provides higher write performance for redundant

RAID arrays. Data is at risk when there is a power failure, system

kernel panic and unresponsive abnormal conditions.

Write Through – Writes directly to the disks (may reduce the risk of

data loss during a critical failure, but at the cost of lower

performance).