Autool CT500 Kullanıcı Kılavuzu - Sayfa 15
Test Ekipmanları Autool CT500 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Autool CT500 17 sayfaları. Gdi fuel injector cleaner & tester
Sayfayı YazdırMAINTENANCE SERVICE
Maintenance
Our products are made of long-lasting and durable materials, and
we insist on perfect production process. Each product leaves the
factory after 35 procedures and 12 times of testing and inspec-
tion work, which ensures that each product has excellent quality
and performance.
To maintain the performance and appearance of the product, it is
recommended that the following product care guidelines be read
carefully：
●
Be careful not to rub the product against rough surfaces or
wear the product, especially the sheet metal housing.
●
Please regularly check the product parts that need to be
tightened and connected. If found loose, please tighten it in
time to ensure the safe operation of the equipment. The exter-
nal and internal parts of the equipment in contact with various
chemical media should be frequently treated with anti-corrosion
treatment such as rust removal and painting to improve the
corrosion resistance of the equipment and extend its service
life.
●
Comply with the safe operating procedures and do not
overload the equipment. The safety guards of the products
are complete and reliable.
●
Unsafe factors are to be eliminated in time. The circuit part
should be checked thoroughly and the aging wires should be
replaced in time.
●
Adjust the clearance of various parts and replace worn
(broken) parts. Avoid contact with corrosive liquids.
●
When not in use, please store the product in a dry place. Do
not store the product in hot, humid, or non-ventilated places.
14