Autool CT500 Kullanıcı Kılavuzu - Sayfa 8

Test Ekipmanları Autool CT500 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Autool CT500 17 sayfaları. Gdi fuel injector cleaner & tester

Sayfayı Yazdır

OPERATION PROCESS

Ultrasonic

cleaning

Ultrasonic cleaning is to use the penetrating and cavitation shock

waves generated when ultrasonic waves propagate in the medium,

and powerfully clean objects with complex shapes, cavities and

pores to completely remove stubborn carbon deposits on the fuel

injector.

Preparation

●

Remove the fuel injector from the vehicle and check whether

its rubber seal is damaged. If it is damaged, it should be

replaced in time before the cleaning test to avoid leakage

during the test. Then put the fuel injection nozzle into the

cleaning agent, carefully remove the external grease and wipe

it with a soft cloth.

●

Turn on the power and turn on the power switch on the side of

the main unit.

●

Put the cleaning bracket in the accessories into the ultrasonic

cleaning tank, and place the wiped fuel injector in the cleaning

bracket positioning hole of the ultrasonic tank.

Methods And Steps

01 Ultrasonic Cleaning

●

Add an appropriate amount of cleaning agent to the ultrasonic

tank.

●

Insert the plugs of the drive wires into the injector sockets in

turn. (Special fuel injectors need to be connected with an

adapter cable)

●

Press the up or down key to select item 01 "Ultrasonic Clean-

ing" , and then press the function setting key to set the working

time.The default working time is 10 minutes, which can be

changed by up and down keys if needed.

Press START button, the system starts to feed pulse signal

●

and cleaning. After finishing cleaning, take out the injectors

from the ultrasonic bath, wipe the cleaning agent on them with

a soft cloth and prepare for the next item.