high pointe RocketRAID 2840A Kullanıcı Kılavuzu - Sayfa 13
Kontrolör high pointe RocketRAID 2840A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. high pointe RocketRAID 2840A 16 sayfaları. Sas 6gb/s pci-express 3.0 x8 raid controller
Sayfayı Yazdır
3.1.7 Settings
To access the Settings menu, highlight the Settings command from the
toolbar, and press the Enter key. There are Select Boot Device and
Parameter Setting options in the menu.
Select Boot Device:
Select which disk or array will act as the boot disk, if the motherboard
BIOS instructs the card to act as the boot device.
When booting up the system, press CTRL + H during the
HighPoint RocketRAID splash screen to enter the BIOS RAID
creation utility.
Navigate to Settings using arrow keys.
Press Enter.
Press Enter again.
Select the desired RAID array.
You will return to the main screen once the boot flag is set
Staggered Spin up:
The default value of this option is disabled. Enabling this setting will
instruct the card to power up the hard disks, sequentially (one disk
approximately every 2 seconds). Not all disk support this setting –
consult the disk documentation for more information.
13