Autopage CAR-PRO CPX-2350 Kullanım Kılavuzu - Sayfa 3

Araba Alarmı Autopage CAR-PRO CPX-2350 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Autopage CAR-PRO CPX-2350 8 sayfaları. Professional vehicle security system

Sayfayı Yazdır

PASSIVE ARMING: (Programmable)

Active arming / disarming is controlling your security system via the remote

transmitter. This security system is equipped with an optional Passive

Arming feature, which allows the security system to arm 30 seconds after

the last door is closed. Operation is as follows.

1. Turn the ignition to the "OFF" position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast

for 30 seconds. If you reopen any door / hood / trunk, the security

system LED will stop flashing. It will begin flashing again once all

vehicle entrances are closed.

3. After 30-second timer has elapsed, the security system will

automatically "ARM". The siren will chirp [1] time and the parking lights

will flash [1] time.

PASSIVE DOOR LOCKING: (Programmable)

The vehicle doors will automatically lock after passive arming cycle has been

completed.

ACTIVE DISARMING – UNLOCK & DISARM:

1. Press the

button on the transmitter.

2. The siren will chirp twice and parking lights will flash twice to indicate that

the security system is now disarmed. The vehicle doors will unlock and

disarm when interfaced with the security system.

TAMPER DISARMING: If the alarm is triggered; upon disarming the

system, the siren will chirp 4 times and parking lights will flash 3 times.

AUTOMATIC RE-ARM (Programmable). If this feature is selected, the

security system will automatically re-arm itself 60 seconds after disarming

with remote transmitter. Automatic rearm will cancel if any door is opened

before the 60 seconds timer has elapsed.

DISARMING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or

inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON' position. (Alarm

will sound.)

2. Within 10 seconds push and release the valet switch

The alarm will stop sounding and enter the disarm mode. You can now

start and operate the vehicle normally.

VALET MODE:

The valet switch allows you to temporarily bypass all alarm function,

eliminating the need to hand your transmitter to parking attendants or

garage mechanics. When the system is in valet mode, all alarm functions

are bypassed, however, the remote panic feature and remote door locks

will remain operational.

Enter Valet Mode:

1. Turn the ignition to "ON" position.