Autopage RF-410 Kullanım Kılavuzu - Sayfa 3

Araba Alarmı Autopage RF-410 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Autopage RF-410 8 sayfaları. Professional vehicle security system

Sayfayı Yazdır

1. Transmitter Operation

PASSIVE ARMING: (See Feature "II - 2" Programming)

Active arming / disarming is controlling your security system via the remote transmitter. This

security system is equipped with an optional Passive Arming feature, which allows the

security system to arm 30 seconds after the last door is closed. Operation is as follows.

1. Turn the ignition to the "OFF" position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you

reopen any door / hood / trunk, the security system LED will stop flashing. It will begin

flashing again once all vehicle entrances are closed.

3. After 30-second timer has elapsed, the security system will automatically "ARM". The siren

will chirp [1] time and the parking lights will flash [1] time.

PASSIVE DOOR LOCKING: (See Feature "II - 2" Programming)

The vehicle doors will automatically lock after passive arming cycle has been completed.

PASSIVE ARMING BY-PASS: While the system disarmed, press the

security will respond with [1] chirp and LED will turn "ON". The security system will remain in

this temporarily state for as long as you wish. To exit passive by -pass, press the

button and the system will return to normal status.

ACTIVE DISARMING – UNLOCK & DISARM:

1. Press the

button on the transmitter.

2. The siren will chirp twice and parking lights will flash twice to indicate that the security

system is now disarmed. The vehicle doors will unlock and disarm when interfaced with the

security system.

TAMPER DISARMING: If the alarm is triggered; upon disarm the system, the siren will chirp 4

times and parking lights will flash 3 times.

PATHWAY ILLUMINATION (See Alarm Feature "II - 4" Programming): This feature turns the

parking light "ON" for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal.

TWO STEP DOOR UNLOCK: (See Feature III – 3 Programming.) This feature will

independently unlock the driver's door only when disarming the security system. Pushing the

button on the transmitter a second time within 3 seconds will unlock the entire vehicle.

AUTOMATIC RE-ARM (See Feature "I - 2" Programming): If this feature is selected, the

security system will automatically re-arm itself 60 seconds after disarming with remote

transmitter. Automatic rearm will cancel if any door is opened before the 60 seconds timer has

elapsed.

DISARMING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON' position. (Alarm will sound.)

2. Within 10 seconds push and release the valet switch

The alarm will stop sounding and enter the disarm mode. You can now start and operate the

vehicle normally.

VALET MODE:

The valet switch allows you to temporarily bypass all alarm function, eliminating the need to

hand your transmitter to parking attendants or garage mechanics. When the system is in

valet mode, all alarm functions are bypassed, however, the remote panic feature and remote

door locks will remain operational.

Enter Valet Mode:

1. Turn the ignition to "ON" position.

2. Push and hold valet switch for 2 seconds or until the LED turns on. The LED will remain on

as long as the system is in 'valet mode'.

Exit Valet Mode:

1. Return to normal operation, turn ignition 'ON'.

2. Push and hold valet switch for 2 seconds; the LED will turn off indicating the system is

exiting the valet mode.

buttons twice, the