Autopage MA-200 Kullanım Kılavuzu - Sayfa 4

Güvenlik Sistemi Autopage MA-200 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Autopage MA-200 13 sayfaları. 2-way remote control motorcycle alarm
Ayrıca Autopage MA-200 için: Kurulum Talimatları Kılavuzu (8 sayfalar)

Sayfayı Yazdır

On (Solid)

Valet Mode

D. CHIRP INDICATORS:

Chirp

Function

1 chirp

Arm

2 chirps

Disarm

4 chirps

Disarm / Triggered

6 chirps

Car locator

F. SYSTEM OPERATING CONDITION:

Siren, Horn

1. Arming

1 Chirp

2. Disarming

2 or 4 Chirps

3. Trigger

Alarming

4. Passive Starter Disable

5. Panic

Alarming

6. Car Locator

6 Chirps

G. ACTIVE ARMING :

1. Press the

button on transmitter.

2. The siren will chirp once and the parking lights will flash once indicating the system is

armed. The LED will begin to flash and the engine starter will be disabled.

SILENT ARMING: Press the

transmitter to arm your security system, No chirp sound will be heard. Arm

confirmation will be through the motorcycles parking lights only.

ARMING WITH NOISELESS MODE: With the system disarmed, press the

chirp once. Within 3 seconds, press

system is set and will be fully armed in 5 seconds with the noiseless mode for one arming cycle. In this

mode, whenever vibration is presented to the protected motorcycle, the shock sensor cannot trigger the

system and the system will only emit a few warn away chirps.

ARMING WITH SHOCK SENSOR BY-PASS: Pressing the

5 seconds will arm the security system and by-pass the shock sensor. The system will chirp one additional

time to confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to

activate for one arming cycle only. The security system will return to normal operation during the next

arming cycle.

PASSIVE STARTER DISABLES: The purpose of the feature is to protect the motorcycle from being stolen

at all times, regardless of whether or not the alarm is armed.

The starter of the vehicle will be disabled 60 seconds after the ignition is turned off. Once the key is turned

off, the LED will flash fast for 60 seconds.

After the 60-second timer has elapsed, the LED will flash slowly (one-half its normal armed rate) to indicate

the passive starter disable is activated and the system will not respond to any trigger input except the

ignition trigger.

ARMING WITH PATHWAY ILLUMINATION: Press the

chirp once. Within 3 seconds, press the

illuminate your pathway.

SILENT ALARM FUNCTION: Press the

arm and with "Silent Alarm Function". The siren / horn will be silenced even if the sensor is triggered in the

armed status.

H. PASSIVE ARMING

Active arming and disarming is controlling your security system via the remote transmitter. This security

system is equipped with an optional Passive Arming feature which allows the security system to arm 30

seconds after the ignition switch is turned off. Operation is as follows.

1. Turn the ignition to the "OFF" position.

2. The security system LED will flash quickly for 30 seconds. Each time a sensor is triggered during the

passive arming countdown, the 30-second countdown starts over.

MA-200 OP REV.A

E. PARKING LIGHTS:

Parking lights

1 flash

Arm

2 flashes

Disarm

3 flashes

Disarm / Triggered

12 flashes

Car locator

Parking Lights

1 Flash

2 or 3 Flashes

Flashes

12 Flashes

button first, within 3 seconds press

button again. The siren will emit one short chirp indicating the

button on the transmitter three times within

button once to arm the system, the siren will

button. The parking lights will turn "ON" for 30 seconds to

and

buttons at the same time. The security system will

Oct/23/2006

Function

LED

Starter

Slow Flash

Disable

Fast Flash or Off

Slow Flash

Disable

Flash

Disable

button on the

button once, the siren will