Autopage RF-525 LCD Kullanım Kılavuzu - Sayfa 16
Güvenlik Sistemi Autopage RF-525 LCD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Autopage RF-525 LCD 20 sayfaları. Professional 2-way lcd 6 channel security system with two-way serial port data link
Sayfayı YazdırTimer Setting: Example to AM10:30
1.
Press & hold the
"Hours" digit flashes for adjusting.
2.
Press the
or
button to decrease or increase the "Hour" digit until AM10: xx
3.
Press the
button once again then the "Minute" digit flashes for adjusting.
4.
Press the
or
button to decrease or increase the "Minutes" digit until AM
10:30
5.
Press the
button for 2 seconds with one-melody sound to confirm exit the
timer program mode.
Alert Alarm Timer Setting: Example to PM 6:30
1.
Press & hold the
"Hours" digit flashes for adjusting.
2.
Press the
button twice, the LCD screen will shows
is flashes for adjusting.
3.
Press the
or
button to decrease or increase the "Hour" digit until PM 6:xx
4.
Press the
button once again then the "Minutes" digit flashes for adjusting.
5.
Press the
or
button to decrease or increase the "Minutes" digit until PM
6:30
6.
Press the
button once again then
setting
7.
Press the
button to start the "Alert Alarm Timer", and the "ON" icon will show
on the LCD screen. Press the
"OFF" icon will show on the LCD screen.
8.
Press
button for 2 seconds with one-melody sound to confirm exit the timer
program mode.
Count Down Timer Setting: Example Set count down timer at 2:30
1.
Press & hold the
"Hours" digit flashes for adjusting.
2.
Press the
button 5 times, the LCD screen will shows
digit is flashes for adjusting.
3.
Press the
or
button to decrease or increase the "Hour" digit until 2:xx
4.
Press the
button once again then the "Minutes" digit flashes for adjusting.
5.
Press the
or
button to decrease or increase the "Minute" digit until 2:30
6.
Press the
button once again then
OFF" setting
7.
Press the
button to start the count down timer, and the "ON" icon will show on
the LCD screen.
Press the
button to stop the count down timer, and the "OFF" icon will show
on the LCD screen.
8.
Press the
button for 2 seconds with one-melody sound to confirm exit the
timer program mode.
Note: Maximum is 19 hours.
button for 3 seconds, with two-melody sound and the
button for 3 seconds, with two-melody sound and the
icon flashes for alert alarm "ON / OFF"
button to stop the "Alert Alarm Timer", and the
button for 3 seconds, with two-melody sound and the
icon flashes for alert alarm "ON /
16
icon and "Hours" digit
icon and "Hours"