DCG CLIMA VE1634TT Manuel - Sayfa 11

Fan DCG CLIMA VE1634TT için çevrimiçi göz atın veya pdf Manuel indirin. DCG CLIMA VE1634TT 17 sayfaları. 13 blades stand fan with timer and remote control

Sayfayı Yazdır

Instruction manual 13 BLADES STAND FAN WITH TIMER AND REMOTE CONTROL

For Table Fan

1. Set the base on the table, insert the connecting adapter into the

base and secure them by turning the connecting adapter clockwise.

2. Place the fan body on the top of the connecting adapter. Tighten

the body securing knob.

ASSEMBLY OF BLADE AND GRILLS

1. Remove and discard the plastic sleeve on the motor shaft. Position

the back grill against the front of the motor housing through the

motor shaft. Ensure all guiding pegs on the motor housing are

lined up with cutouts on the back grill.

2. Secure the back grill into place with the mounting nut. Fasten the

nut firmly onto the motor housing by tightening it in a clockwise

direction.

3. Install the fan blade onto the motor shaft with the cutouts fitted.

Place the blade cap on the motor shaft after the blade. Fasten into

place by tightening the cap in a counter-clockwise direction.

4. Attach front grill to the back grill and hold in place with back grill

lock then tight the lock screw.

5. Check the correct rotation of the blade.

OPERATING INSTRUCTIONS

Plug into 220-240V~ 50Hz power socket, the appliance will be

in standby mode and the display will indicate the current room

temperature and will gradually change as the room temperature

changes.

The appliance may be operated by the press buttons on the control

panel or by the supplied remote control.

1. Press ON/OFF button to power on, the appliance operates at

default low fan speed.

2. Press SPEED button to select desired speed Low-Medium-High in

turn. LED display will display the corresponding wind speed. The

dcg16.it