DCI DigiTrak Falcon F5 iGPS Ek Kılavuz - Sayfa 12
GPS DCI DigiTrak Falcon F5 iGPS için çevrimiçi göz atın veya pdf Ek Kılavuz indirin. DCI DigiTrak Falcon F5 iGPS 15 sayfaları.
Sayfayı YazdırD
C
IGITAL
ONTROL
Upload White Line to PC
Upload a white line to a PC in much the same way you upload a DataLog file:
1. In LWD 3.04, open the desired LWD job.
2. Click Manage GNSS White Lines
3. Click Import.
4. On the receiver, select a White Line job from the list.
5. In LWD, click Connect to Device to upload the job.
6. Repeat for each White Line job. Multiple White Lines can be attached to one LWD file and
selectively displayed later on Google Earth maps.
7. To exit the job list on the receiver, toggle up at the top of the list.
If your version of LWD does not have a Manage GNSS White Lines icon, contact DCI customer service for a
software upgrade.
LWD and WL (White Line) job numbers on the receiver are simply sequential; they do not
correspond and are not connected to each other. Ensure you upload White Lines to the correct
DataLog in LWD, or the White Line and bore will display in different geographic locations. To
view a White Line without associating it to any drill data, import it into a new blank LWD job.
9
I
NCORPORATED
.
White Line Job List
DigiTrak Falcon F5 iGPS Supplement A