Dynasty Fireplaces DY-BTW48 Ev Sahibinin Kurulum Talimatları ve Kullanım Kılavuzu - Sayfa 10

Kapalı Şömine Dynasty Fireplaces DY-BTW48 için çevrimiçi göz atın veya pdf Ev Sahibinin Kurulum Talimatları ve Kullanım Kılavuzu indirin. Dynasty Fireplaces DY-BTW48 16 sayfaları.

Fix the 4pcs ST4X25 screws on the wood block. Make sure the front of the firebox is not
STEP 5.
lower than the surface of the wall.
Carefully spread the small crystal stones across the fuel bed. Then evenly arrange the
STEP 6.
larger crystal stones along the inset window ledge at the front of the firebox.
The next step requires installation of a GLASS panel! The manufacturer recommends
that two adults install the glass panel. Always use extreme caution when handling
glass. Failure to do so could result in personal injury or property damage.
STEP 6. Carefully set both hooks of the front glass panel onto the firebox. NOTE: Make sure
the glass fully attached to the firebox so that the control panel can work properly. This will
keep the decorative glass in place and enable the control panel work.
9