Autopot AQUAvalve5 Auto3 XL Basit Bakım Manüelleri - Sayfa 2
Çim ve Bahçe Ekipmanları Autopot AQUAvalve5 Auto3 XL için çevrimiçi göz atın veya pdf Basit Bakım Manüelleri indirin. Autopot AQUAvalve5 Auto3 XL 2 sayfaları.
Sayfayı YazdırAuto3 XL FlexiPot contents
• 1x Auto3 XL tray, lid & access cover
• 1x AQUAvalve5
• 1x AQUAvalve cover
• 1x 9mm top hat grommet
3
• 1x metre 9mm piping
• 3x 20 L fabric FlexiPot
• 3x FlexiPot PotSock
Pot and Tray Dimensions
1145mm
Required Reservoir Capacity
Auto3 XL
1x Auto3 XL
2x Auto3 XL
System Size
FlexiTank or
FlexiTank
FlexiTank
FlexiTank Pro
50ltr
/ Pro 100ltr
Capacity
•
Please note that multiple FlexiPots may increase room humidity due to the exposed surfaces of the fabric pots.
•
Pot up your plants, water through, then allow your plants to establish in the pots for a period of 10 to 14 days before turning
your system on. This will encourage a stronger and healthier root system.
•
Always raise your reservoir to a minimum of 150mm above the highest AQUAvalve and re-fill the reservoir when there is
approximately a 1/3 of the solution left - NEVER ALLOW THE RESERVOIR TO RUN EMPTY.
•
With AQUAvalve5 systems mineral or organic fertilisers may be fed via the reservoir and pipework. Organic
require a water pump in the reservoir running for 15 mins every 2 hrs and cleaning of the reservoir, pump, and filter each
time the reservoir empties. Flush pipework with plain water every time the reservoir empties.
•
Clean all substrate from the bottom and sides of the pots before placing in trays to ensure AQUAvalve functionality.
•
Always use free draining substrates, for example: soil/perlite, coco/perlite, soil/clay pebbles, coco/clay pebbles, rockwool/
clay pebbles.
[email protected] I www.autopot.co.uk I +44 (0)844 8581520
Auto3 XL contents
• 1x Auto3 XL tray, lid & access cover
• 1x AQUAvalve5
• 1x AQUAvalve cover
• 1x 9mm top hat grommet
3
• 1x metre 9mm piping
• 3x 25 L XL solid pot
• 3x root control disc
280mm
330mm
FlexiPot
25 ltr
pot
20L
275mm
120mm
Included with
Included with
Auto3 XL FlexiPot
Auto3 XL
FlexiTank and FlexiTank Pro are the only collapsible reservoirs
that AutoPot recommend for use with Auto3 XL Tray Systems.
A minimum 50ltr reservoir is required per unit.
4x Auto3 XL
8x Auto3 XL
10x Auto3 XL
FlexiTank
FlexiTank /
FlexiTank
/ Pro 225ltr
Pro 400ltr
Advice
Auto3 XL FlexiPot Setup
1a
2a
3
5
750ltr
7
fertilisers will
Auto3 XL Setup
3
1b
Fit the FlexiPot PotSock over
the base of each FlexiPot
2b
Fill FlexiPot with medium
and pot up plants.
Water through pot
and allow to drain
outside the tray.
Common to both:
4
Push 9mm top hat grommet
into the port in the tray wall.
Thread 9mm pipe into the
tray through the grommet.
6
Cut 9mm pipe to
appropriate length.
Connect via 9mm
/ 16mm fittings to a
filter (not included).
Connect filter to reservoir.
Leave tap off.
8
Remove any slack from
9mm pipe by drawing
excess pipe out of the tray.
Ensure that the circular
spirit level indicates
the tray is level,
adjust if required.
Allow your plants to establish for 7-10 days before turning system on
Advice
If you require any guidance email - [email protected]
3
Place circular root
control disc gold face
down in the pot.
Fill pot with medium and
pot up plants.
Water through pot and
allow to drain outside
the tray.
Remove AQUAvalve collar.
Push 9mm pipe through
collar and attach to
AQUAvalve nozzle.
Rescrew collar - DON'T
overturn... when you
feel it grip STOP.
Place AQUAvalve cover
over the AQUAvalve.
The AQUAvalve and
cover should be placed
directly onto the tray.
Make sure the
system is clean and
free of debris.
Place the lid on top
of the tray. Insert the
pots. Place the access
cover over the valve.