Highendled YHLL-012-3W-36 Kullanım Kılavuzları - Sayfa 2

DJ Ekipmanları Highendled YHLL-012-3W-36 için çevrimiçi göz atın veya pdf Kullanım Kılavuzları indirin. Highendled YHLL-012-3W-36 2 sayfaları. Led par64

Sayfayı Yazdır

Mode Selection

Here above seven kinds running mode are selected by MODE button. Press MODE button and UP button at

the same time, when it is on, you can initialize it at extra factory setting, running on the auto-run program

mode. To make the display stay on all of the time press the MODE and UP buttons at the same time. To make

the display turn off after 20 seconds, press the MODE and DOWN buttons at the same time.

1. Static color select mode

Press "MODE" button, select static color select mode. At this time, the three digital tube displays "C. L.×",

Press "UP" or "DOWN" to select static colors 0-7 under this mode.

2. Color change mode

Press "MODE" button, select color change mode. At this time, the three digital tube displays "J.××" . Press UP

or DOWN to select the color change speed grade 1-99 under this mode.(From slow to quick)

3. Color dreaming mode

Press "MODE" button, select color dreaming mode. At this time, the three digital tube displays "F.××" . Press

UP or DOWN to select the color dreaming speed grade 1-99 under this mode. (From slow to quick)

4. Auto-run program mode

Press "MODE" button to select the auto-run program mode. At this time, the three digital tube displays "A.- -",

the color change program and color dreaming program run alternatively. Press UP or DOWN button is no use

in this mode.

5. Sound active mode

Press "MODE" button to select the sound active program mode. At this time, he three digital tube displays

"S.××". Press UP or DOWN to select sound-active sensitivity grade 0-31.0 is off sound-active,1 is the lowest

sensitivity,31 is the highest sensitivity.

6. Slave mode

Press "MODE" button to select slave mode. At this time, the three digital tube displays "S.L.A. "Press UP or

DOWN button is no use in this mode.

7. DMX mode

Press "MODE" button to select slave mode. At this time, the three digital tube displays DMX address"×××"

Press UP or DOWN to select DMX address. You can set 512pcs address from 001 to 512.It will be flicker

when there is no controller signal.

DMX MODE: 5 DMX channels

CH NO.

CH1

CH2

CH3

CH4

VALUE

000~255

000~189

190~250

251~255

2 of 2 pages

FUNCTION

Red (dim→bright)

Green (dim→bright)

Blue (dim→bright)

Total dimmer (dim→bright)

Strobe (slow→fast)

No function