Highendled YHLL-001TZ 4IN1 LED Par Kullanım Kılavuzu - Sayfa 4

Taşkın Işık Highendled YHLL-001TZ 4IN1 LED Par için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Highendled YHLL-001TZ 4IN1 LED Par 7 sayfaları.

Sayfayı Yazdır

AF-(X) Color Mixing Modes 1-8,the Color change program Modes&Color Mixing Modes speed SP(XX) 1-16

and the beam angle from big to small.

1-Lowest Speed

Sound-Active Mode

1. Press MODE button until you select SO-(X).Press UP or DOWN to select the Sound-Active Mode

1-8.

2. Continue pressing SET UP button to select SJ-(X).Press UP or DOWN to select the Audio

Sensitivity 1-8.

1-Off Sound-Active

3. Continue pressing SET UP button to select Z.(XXX).Press UP or DOWN to the beam angle from big

to small.

0-the biggest beam angle

Other Mode

Three styles are built into the YHLL-001Z 4 in 1–Display on/off mode,Display normal/inversion

mode,Initialization mode,reset mode.

1. Display on/off mode:Press MODE button until you select "don".Press UP or DOWN to select

display always on "don" or the display off "doFF"

2. Display normal/inversion mode:Continue pressing SET UP button until you select"Stnd".Press UP or

DOWN button to select display normal"Stnd" or display inversion"evr".

Initialization mode:Continue pressing SET UP button until you select"dEFA".Now press UP and

DOWN at the same time,you can initialize it at extra factory setting,running on the the first color change

program mode,and the four digital tube displays"AJ-1".

Reset mode:Continue pressing SET UP button until you select"rESt".Now press UP and

DOWN at the same time,the electric machine will reset automatically to make sure that it will be in the

right position.

DMX mode

You can control the devices individually via your DMX controller. The YHLL-001Z 4 in 1 is in slave mode in

any situation of DMX mode when it is combined to other YHLL-001Z 4 in 1, but not with a DMX-controller.

Addressing

The DMX control board allows you to assign the DMX address which is defined as the first channel

from which the YHLL-001Z will respond to from the controller.

1. Press MODE button until the display reads A.XXX

2. Press UP or DOWN to set the DMX address.

You can set 508 pcs. at most when the YHLL-001Z it is in 5 channels DMX mode,507 pcs. at most

when it is in 6 channels DMX mode,506 pcs at most when it is in 7 channels DMX mode,505 pcs at

most when it is in 8 channels DMX mode.The LED display will flicker when there is no controller

16-Highest Speed

2-Lowest Sensitivity

190-the smallest beam angle

4 of 7 pages

8-Highest Sensitivity