GalileoSky v 7.0 Kullanıcı Kılavuzu - Sayfa 4
GPS GalileoSky v 7.0 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. GalileoSky v 7.0 12 sayfaları. Installation and connection of galileosky tracking device
Sayfayı YazdırInstallation and Connection of Galileosky Tracking Device
version 7 dated from 19.06.2018
Setting of Galileosky Device to
Switch-on
Preparation of the connector a tracking device
Together with a device, you get a counterpart of socket and several crimped conductors.
On the back of the body, there is a schematic representation of the contacts to be connected
and location of main service openings (Picture 1).
ATTENTION!
The symbol of tracking device board key is sometimes perceived as a connection
strap between RS232 and RS485 contacts. Be careful, there should not be any connection
strap!
The order of tracking device board assembling is as follows:
1.
Rotate the tracking device board in such a way that the key has been at the top of the
socket and the places of conductors connection have been directed towards the user
(Picture 2);
Pic. 1
Scheme of contacts
location
Pic. 2
Terminal boards
4