Dynatech QUASAR-SV Kullanım ve Bakım Kılavuzu için Talimatlar - Sayfa 7

Kaldırma Sistemleri Dynatech QUASAR-SV için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu için Talimatlar indirin. Dynatech QUASAR-SV 13 sayfaları. Overspeed governor

Sayfayı Yazdır

INSTRUCTIONS: QUASAR SV Code: DYN 64.1.06

Date: 08/11/2016 Revision: 06

For further information on the Quasar SV's tensioning devices, please refer to the Quasar-SV's Tensioners manual.

4.3 REMOTE TRIPPING SYSTEM

The governor incorporates a remote jamming system to check for the correct interlocking of the governor and the

subsequent jamming of the safety gear.

It is basically made up of a remote electromagnetic interlocking system that may be operated from the machine room.

There are three versions available for the installer to choose at his/her convenience.



24 V DC (Direct current) coil. A 1.2 A intensity must be guaranteed.



48 V DC (Direct current) coil. A 0.56 A intensity must be guaranteed.



190 V DC (Direct current) coil. A 0.16 A intensity must be guaranteed.

4.4 OVERSPEED CONTACT

The governor incorporates an overspeed contact. Bearing in mind that the governor will be fitted in the car, this is an

automatic reset contact. In any case, after an interlocking, the lift must be started by a qualified person without having

to directly access the governor.

An image of the overspeed contact's location is displayed below, where (1) is the automatic reset contact.

Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer

area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/