Dynatech T-25UD Kullanım ve Bakım Kılavuzu için Talimatlar - Sayfa 5

Endüstriyel Elektrik Dynatech T-25UD için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu için Talimatlar indirin. Dynatech T-25UD 8 sayfaları. Ucm unit
Ayrıca Dynatech T-25UD için: Kullanım ve Bakım Kılavuzu için Talimatlar (9 sayfalar), Kullanım ve Bakım Kılavuzu için Talimatlar (9 sayfalar)

D-Box + Vega A3 Beta + ASG 1XX + T-25 Instruction Manual

Date: 23-05-2017

Revision: 03



D-Box's input signals are typical of the installation controller. As a result, response times of the controller

components are inherent to it even though the total response times of the D-Box + Vega A3 Beta+ ASG 1XX

+ T-25 unit are considered as standard.



In the case of checking the installation or carrying out a manual rescue, it must be checked that the D-Box

is set at the correct operation mode for each of these situations so as to prevent unwanted jamming in the

safety wears.



The parking or anti-creep system, Beta model, incorporated in the Vega governor to detect uncontrolled

movements, must always include a 24V coil in order to operate correctly along with the D-Box.

3 DESCRIPTION OF THE UNIT

3.1 COMPONENTS OF THE SYSTEM

The components making up the system are:



CONTROL SYSTEM

The D-Box operates as a control system.



GOVERNOR

The Vega model two-way governor operates as a UCM actuator.



SAFETY GEAR AND STEERING MECHANISM

The two-way progressive safety gear model ASG-1XX/ASG-1XX UD is used as a braking means.

3.2 OPERATION AS A UNIT

As can be seen in figure 2, the D-Box electronic device is connected to the installation controller and the Vega

governor's parking system. D-Box connection is described in the D-Box's manual for use and maintenance.

The governor is directly anchored to the slab in the machine room or to the upper part of the lift shaft, linked to its

tensioning pulley in the pit via the rope. This tensioning pulley is anchored to the guide rail b means of clamps.

Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer

area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/

Cod: DYN 62-1.03