HighGear Duo Kullanıcı Kılavuzu - Sayfa 18

Kalp Atış Hızı Monitörü HighGear Duo için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HighGear Duo 19 sayfaları. Highgear pulseware duo heart rate monitor: user guide
Ayrıca HighGear Duo için: Hızlı Başlangıç Talimatları (2 sayfalar)

Sayfayı Yazdır

TROUBLESHOOTING – BASIC

Your Pulseware heart rate monitor is a very sensitive and sophis-

ticated instrument. If properly cared for it should last and remain

accurate for many years. However, from time to time problems may

occur. It has been our experience that the majority of the problems

seen by consumers with products such as the Pulseware are related

to dead or dying batteries.

While the estimated life of a fresh battery in the unit is approximately

one year, this can be shortened considerably if the backlight feature

of the unit is used extensively. Whenever you are experiencing issues

related to the function of the unit it is recommended that you install a

fresh battery as a first course of action, especially if it has been more

than a half a year since the last time the battery was replaced.

BE AWARE:

Lithium batteries of the type used in this watch are very

susceptible to improper storage. Many times, batteries purchased as

new are dead or weak before they are purchased. Do not assume that

batteries in stores are good. If you try a new battery and problems

persist, please try a second battery from another source, just to be

certain.

If the battery on the watch unit of the Pulseware heart rate monitor

is failing it may show itself in several ways. Indications of a weak

battery are:

1. A fading or blank display. Also if the display goes blank when the

backlight is operated and then comes back on when the backlight

system turns off.

2. Inaccurate readings from the heart rate systems.

3. Reduced heart rate system reception distance.

TROUBLE SHOOTING – HEART RATE

INTERFERENCE

Heart rate monitors are subject to interference from a wide range

of external sources of electromagnetic and microwave radiation.

High tension power lines, home and automotive electronics, exercise

equipment, home security systems, traffic light controls, airport radar

systems and other things are capable under the right conditions of

blocking the heart rate transmission system. When this happens, the

user will usually notice a very heart rate reading (200+ ) or a reading

of zero. Usually sources of interference are localized and the unit will

return to proper operation in a few seconds or at most minutes.

CROSS TALK (USING CHEST STRAP TRANSMITTER)

Exercising in close proximity to other people using heart rate monitors

may cause your watch to pick up signals from chest straps other than

your own. This is known as Cross Talk. To avoid problems associated

with Cross Talk it is recommended that you separate yourself from

others wearing heart rate monitors by a minimum of 3' or 1m in all

directions.

TRANSMISSION RANGE

(USING CHEST STRAP TRANSMITTER)

The heart rate monitor system has an effective range of 28-30 inches

(.75 meters). If the monitor is separated from the transmitter strap by

a greater distance than this, you may not be able to receive a heart

rate signal. Additionally, the orientation of the watch and transmitter

must be such that the reading direction of watch face is not aligned

perpendicular to the transmitter. Having the system in this orientation

will significantly reduce the units range.