HighGear Compass Kullanıcı Kılavuzu - Sayfa 13

Pusula HighGear Compass için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HighGear Compass 19 sayfaları. Highgear enduro compass compass: user guide

Sayfayı Yazdır

SETTING THE WATCH FUNCTIONS

CALIBRATING THE COMPASS

In Compass mode:

PRESS & HOLD

the

SET/CLEAR

sequence.

ROTATE CAL will appear in the center of the display. 32-

segment ring around the outside will animate clockwise to

prompt the user to rotate the watch during calibration.

Rotate the watch clockwise for two complete rotations of

approximately 15-seconds per rotation.

NOTE: For the optimum accuracy, the compass must be

held completely level during the calibration process. We

recommend placing the unit on top of a drinking glass

while performing the calibration as this will make it easier

to keep the compass level.

Advance to set DECLINATION by

key.

NOTE: If you do not know the Magnetic Declination for

your area, leave this setting at zero.

Set DECLINATION by

PRESSING

STOP/NEXT

key for WESTERN (-).

PRESS SET/CLEAR

to exit the setting sequence.

(

)

CONTINUED

key to enter the calibration

PRESSING

the

MODE

the

START/LAP

key for EASTERN (+) or

SETTING THE WATCH FUNCTIONS

MAGNETIC DECLINATION

A magnetic compass points to the earth's magnetic north pole. Depending on your

location, this may be different from True North. Adjusting the Magnetic Declination

allows you to compensate for this variation. Magnetic Declination for an area can be

found on topographical maps. Declination can change over time and distance. Make

sure the source for your declination settings is up to date. The following websites are

good sources for finding local Magnetic Declination.

FOR U.S. DECLINATIONS:

http://www.ngdc.noaa.gov/seg/geomag/jsp/Declination.jsp

FOR CANADIAN DECLINATIONS:

http://gsc.nrcan.gc.ca/geomag/field/mdcalc_e.php