Gallagher TWR-1 Hızlı Başlangıç Kılavuzu - Sayfa 2
Terazi Gallagher TWR-1 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Gallagher TWR-1 16 sayfaları. Weigh scale unit
Sayfayı Yazdır
SPECIFICATIONS
Operating Temperature
Environmental Protection Rating
Input Voltage
Estimated battery run time
Weigh only
Weigh/Read
Read only
CHARGING THE BATTERY
To ensure optimum performance of the TWR-1, the internal battery may need to
be charged for up to 16 hours before first time use.
Important: If the TWR-1 is to be stored for an extended period, this should be
in a cool dry place with a fully charged battery.
1.
Connect the power adapter at the base of the unit and plug the TWR-1 into a
power outlet and switch ON.
The charging icon will display on the screen.
2.
When the charge shows 100% the TWR-1 is ready to use with or without the
power adapter.
Note:
•
When the TWR-1 is in use, the battery icon
will display and show remaining charge.
•
When using the scale and the charge level falls below 10% the battery icon
will flash with a red outline. You will have about 30 minutes to complete the
weighing session before the TWR-1 must be charged.
•
When the charge level becomes critical the unit will shut down.
•
To check remaining run time at current settings, from the Home screen, go to
Settings
2
> About > Battery
Gallagher TWR-1 Weigh Scale Quick Start Guide
-20
to 50
C
o
o
-5
to 120
F
o
o
IP67
12 V DC
at
100% brightness
12 hours
6 hours
3 hours
.
at 60% brightness
16 hours
8 hours
4 hours