Gallagher T10 Kurulum Notu - Sayfa 7

Kart Okuyucu Gallagher T10 için çevrimiçi göz atın veya pdf Kurulum Notu indirin. Gallagher T10 11 sayfaları. Reader
Ayrıca Gallagher T10 için: Kurulum Notları (12 sayfalar), Kurulum Notları (12 sayfalar)

Sayfayı Yazdır
Gallagher T10 Kurulum Notu
Connecting to the Cardax FT Controller 3000-4R or 3000-8R
The Cardax FT Controller 3000-4R can interface up to four Gallagher T10
Mifare readers into the Cardax FT Command Centre system. The Cardax
FT Controller 3000-8R can interface up to eight Gallagher T10 Mifare
readers into the Cardax FT Command Centre system.
The ports to which the Gallagher T10 Mifare reader can connect are set up
as groups, as follows:
•
Two groups (numbered 1 and 2) on the Controller 3000-4R, and
•
Four groups (numbered 1 to 4) on the Controller 3000-8R
Each group provides connection for two Gallagher T10 Mifare readers.
Refer to the following diagram for the location of the ports on the Cardax
FT Controller 3000-8R.
Note: Even though there are only two groups of ports on the Cardax FT
Controller 3000-4R, they are located in the same position.
Installation Note | Gallagher T10 Mifare Reader
Part Number: 3E2453 R1 | 7