Highland heat Kompakt 16 Kullanıcı Kılavuzu - Sayfa 15

Kazan Highland heat Kompakt 16 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Highland heat Kompakt 16 20 sayfaları. Solid fuel boiler

Kompakt

5. Using the boiler

5.4 Boiler operation

1) Depending on the heat demand and burning intensity,

refuel periodically.

2) When leaving the boiler to operate during the night, the air

supply valve can be set - thereby reducing the boiler power. But

after reducing the air supply too much, it starts to accumulate

soot on the walls of the boiler and the efficiency of the boiler

decreases.

3) The boiler door must be closed during operation.

Ashtray.

Clean the ashtray as needed, depending on the type of fuel

used. A full ashtray prevents the proper combustion of fuel -

improper air distribution occurs, so the fuel burns unevenly

along the entire length of the boiler.

Cleaning.

It is recommended that all combustion waste and slag be

cleaned before each new ignition. The heat exchanger is easily

cleaned through the upper door. The combustion chamber is

cleaned through the middle door. Cleaning of cast iron grates

and ashtray is done by pulling out the components through the

bottom door.

Recommendations.

• The tar layer formed inside the boiler can be reduced by

burning aspen or black alder wood at maximum temperature.

• Periodically inspect the boiler and heating system.