Copernicus Tech Tub TEC600C-8 Montaj Kılavuzu - Sayfa 11
Dış Mekan Arabası Copernicus Tech Tub TEC600C-8 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. Copernicus Tech Tub TEC600C-8 12 sayfaları. For 6 tablets
Ayrıca Copernicus Tech Tub TEC600C-8 için: Montaj Kılavuzu (13 sayfalar)
Sayfayı Yazdır
OPTIONAL:
(TEC600C, TEC600C-8 ONLY)
You will need: (Not to Scale)
11
Use Template and Drill Holes into Surface
Use positioning template
found at back of these
Assembly Instructions
Maximum thickness of
surface is 2-1/2" (63mm)
Use tape to secure
the positioning template
Actual Size:
12
You will need:
Mount Locking Block
G
E
E
7
Follow Steps 11 to 13 to install the Tech Tub
Locking Block and Locking Pin System
This system allows you to lock your Tech Tub to a
table or countertop. This is a really good idea if you
leave your devices out in the open or your room
doesn't lock. You can then lock the Tech Tub in place
and lock the Tech Tub itself.
Table or Countertop
M6 Washer
E
F
x6
(Not to Scale)
Allen Key 4mm
x1
Drilled holes from Step 6
Version B - Released October 25, 2021 - Copernicus Educational Products Inc.
®
M6 x 70mm
M6 Lock Nut
G
x2
x2
Locking Block
x1
Label facing
upwards
E
F
Underside
Positioning Template (found at
back of this guide)
x1
Use 1/4" or 6mm drill bit
Washer goes
E
INSIDE tube
Table
or
F
G
®
Washer goes
E
UNDER tube
Countertop
E
Section
View