HIGHLEAD GC0518-1 Kullanım Kılavuzu Parça Kataloğu - Sayfa 2
Dikiş Makinesi HIGHLEAD GC0518-1 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu Parça Kataloğu indirin. HIGHLEAD GC0518-1 13 sayfaları. Heavy duty compound feed lockstitch sewing machine
Ayrıca HIGHLEAD GC0518-1 için: Kullanım Kılavuzu (10 sayfalar)
Sayfayı Yazdır
1
PRECAUTIONS BEFORE STARTING OPERATION
1
Safety precautions
1 ) When turning the power on, keep your hands and fingers away from the area
around/under the needle and the area around the balance wheel.
2 ) Power must be turned off when the machine is not in use, or when the operator leaves the seat
3 ) Power must be turned off when tilting the machine head, installing or removing the "V" belt,
adjusting the machine, or when replacing.
4 ) Avoid placing fingers, hairs, bars etc., near the balance wheel, "V" belt, bobbin winder balance
wheel, or motor when the machine is in operation.
5 ) Do not insert fingers into the thread take-up cover, under/around the needle,
or balance wheel when the machine is in operation.
6 ) If a belt cover, finger guard, eye guard are installed, do not operate the machine
without these safety devices.
2 Precautions before starting operation
1 ) If the machine's oil pan has an oil sump, never operate the machine before filling it.
2 ) If the machine is lubricated by a drop oiler, never operate the machine before lubricating.
3 ) When a new sewing machine is first turned on, verify the rotational direction of the
balance wheel with the power on. (The balance wheel should rotate counter-clockwise
when viewed from the balance wheel)
4 ) Verify the voltage and (single or three) phase with those given on the machine nameplate.
3 Precautions for operating conditions
1 ) Avoid using the machine at abnormally high temperature (35°C or higher)
or low temperature (5°C or lower)
2 ) Avoid using the machine in dusty conditions.
2 MAIN SPECIFICATIONS
Item
Max. Sewing Speed
Stitch Length
Take-up Lever Stroke
Needle Bar Stroke
Height of Between Main and
Sub Presser Foot
Presser foot lift by Hand
Presser foot lift by Knee
Needle
Rotating Hook
Lubrication
Motor
GC0618-1
GC0618-1 SC
25mm
Double Capacity Hook
370W Clutch Motor
GC0618-1 D2
2000rpm
0-10mm
71.5mm
35mm
8mm
14mm
DPX 17 22# 24#
Large Hook for
Trimmer
Manual
Speed adj.
Motor
GC0518-1
Double Capaci-
ty Hook
370W Clutch
Motor