2hp Rnd Manuel - Sayfa 4

Müzik Ekipmanları 2hp Rnd için çevrimiçi göz atın veya pdf Manuel indirin. 2hp Rnd 7 sayfaları. Random voltage generator

Installation

To install, locate 2 HP of space in your Eurorack case and confirm the positive

12 volts and negative 12 volts sides of the power distribution lines.

Plug the connector into the power distribution board of your case, keeping in mind

that the red band corresponds to negative 12 volts.

In most systems the negative 12 volt supply line is at the bottom.

The power cable should be connected to the Rnd with the red band facing the

bottom of the module.

Specifications

Format: 2 HP Eurorack module

Depth: 34mm (Skiff Friendly)

Max Current: +12V = 40mA

-12V = 16mA