Dynaudio Focus 20 XD Kullanıcı El Kitabı - Sayfa 7
Konuşmacılar Dynaudio Focus 20 XD için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dynaudio Focus 20 XD 15 sayfaları.
Ayrıca Dynaudio Focus 20 XD için: İlk Kez Kurulum (2 sayfalar)
Sayfayı Yazdır
Owner's Manual Focus XD
Connections
This section describes the connections and control elements
for the components. Please contact your Dynaudio distributor
and control
if you have any problems with connection and start-up.
elements
Distributor addresses can be found on the Internet at
dynaudio.com. The active loudspeakers have an integrated
amplifier and can be controlled with the remote control.
12
dynaudio.com/focusxd
CONNECTIONS AND CONTROL ELEMENTS
Digital connection. IN = input, OUT = output
Digital Audio
Analog Audio
Analog connection. IN = input, Input sensitivity = manual correction of the input sensitivity (+6 / 0 / -6 dB)
Service
USB port for firmware update
Speaker Position
Sound adjustment (depending on the position of the loudspeakers). Sound adjustment is performed with a
rotary knob with 7 positions. With the 3 main positions, the rotary knob clicks into place:
Neutral = with free-standing placement. Wall = if placed near a wall. Corner = if placed in a corner
Treble
Treble adjustment (+1 / 0 / -1 dB)
Zone
Selecting the audio zone (Xeo hub operation)
Loudspeakers assigned to different zones can be controlled separately via the remote control.
The zones are identified as Red, Green, and Blue.
Channel Mode
Master = loudspeaker operated as master. Slave = loudspeaker operated as slave.
External = loudspeaker configured as active loudspeaker (at full performance)
Power
Power switch. I = The loudspeaker is on. The loudspeaker can be activated and deactivated via the remote
control. If the loudspeaker is activated and there is no signal, it will switch to standby mode.
O = The loudspeaker is completely off.
Mains socket. To connect the loudspeaker to the mains voltage.
Connection and control elements
13