Dynaudio Loudspeakers Kullanıcı El Kitabı - Sayfa 9

Konuşmacılar Dynaudio Loudspeakers için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dynaudio Loudspeakers 18 sayfaları.

Positioning

Fig. 4

Distance to walls.

Distance to back and side walls

Every loudspeaker not only disperses sound energy directly into the room, but also to the

side and even backwards. As a result, time-delayed reflections occur and add to the

original music signal. Thus, when loudspeakers are positioned too close to walls, the

sound quality can be restricted.

Dynaudio loudspeakers were developed to be placed free-standing, and therefore they

reach their optimum performance when positioned as clear of any walls as possible.

 To reduce possible influences from the back and sidewalls, the distance to these

boundaries should ideally not be less than 0.5 meter.

To minimize low frequency reflections, which will be heard as a thickening of the sound,

the loudspeaker models can be adapted to the room's acoustic character by using foam

plugs in the bass reflex port. This will essentially attenuate the room-induced boost in the

low frequency range by dampening the deep frequencies, yielding a more clear and tight

A, B  0.5 m

sound when the loudspeaker is positioned near rear walls.

A  B

 Fully insert the foam port plugs packed with your loudspeaker into the bass reflex tube,

to attenuate the bass output (if required).

Dynaudio Loudspeakers