Copland CDA825 Kullanıcı Kılavuzu - Sayfa 6

CD Çalar Copland CDA825 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Copland CDA825 8 sayfaları. Cd player

The basis functions of the remote are the same as found on the front panel of the CD-player.

However, the advanced functions below are to be found on the remote control only :

Numeric buttons :

Selection of track with numeric buttons.

To designate a track directly, select the desired track number with the

numeric keys, then press the "PLAY" key.

PROGRAM : a. Press STOP

b. Select track with numeric buttons.

c. Press PROG, and the track is stored.

Repeat b – c to program more tracks.

If you wish to remove a track from the program – press the track number

followed by PROG.

SCAN :

10 seconds play-back of every track on the disc.

TIME :

1 push - Total time played

2 push - Total remaining time

3 push - Return ( shows status of single track )

A/B :

A-B repeat function is used for the repeat play of a specific portion of a track.

While playing a disc, if you press "A-B" key, the starting point to be played

repeatedly is registered with the letter "A-" on the display. Then press "A-B"

key again to set the ending point. "REPEAT A-B" appears on the display and

the specific portion will be played repeatedly.

Press SHUF and the transport will play tracks in random order until all tracks

SHUF :

have been played. SHUFFLE will be shown in panel display.

REP :

To repeat all tracks of a disc press the "REPEAT" key.

Press the "REPEAT" key one more time and "REPEAT 1" appears, and only

the current track will be repeated.

To cancel repeat play, press the "REPEAT" key again.

(