Gallet Blizzard VEN40S Kullanım Kılavuzu - Sayfa 13
Fan Gallet Blizzard VEN40S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Gallet Blizzard VEN40S 17 sayfaları.
Sayfayı YazdırDescription of the controls
P1
Front grill
P2
Blade
P3
Rear grill
P4
Motor cover
P5
Oscillating knob
P6
Motor
P7
Screw B
P8
Extension pole
P9
Height adjustment nut
P10
Base cover
P11
Base tube
P12
Screw A
P13
Shaft
P14
Piano keys
P15
Grill screw
P16
Blade screw
P17
Clip
P18
Swivel adjustment knob
P19
Vane
P20
Base
P21
Screw C
P 22 End cap
Instructions for Use
Assembling of unit
Take all parts out of the box and remove all packing material.
1)
Put the end cap (P22) at the end of the cross base P20 and firm it with screw P21 .
2)
Fasten the base tube P11 on the cross base P20 with screw A (P12)
3)
Slide the base cover onto cross base along the lower pipe.
4)
Pull the extension pole (P8) out and the tighten the out-joint.
5)
Place the motor and switch box firmly on the top of the extension pole, and tighten screw B
(P7)
6)
Unscrew the gril screw P15 from motor cover P4 and put the rear grill P3 on the motor
cover P4. After this tighten the rear grill by screw P15.
7)
Place the blade P2 and tighten by blade screw P16.
8)
Fasten the vane P19 on the front grill P1 by swivel adjustment knob P18.
9)
Put the front grill P1 on the rear grill P3 and tighten with clip P17.
10)
This all part put in to the base tube P11, set requied height and tighten nut P9.
ENG - 13
ENG