Galletti AREO S 12 Teknik Kılavuz - Sayfa 10
Klima Galletti AREO S 12 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Galletti AREO S 12 12 sayfaları. Aero s series fan heater for steam operation
Sayfayı Yazdır
AREO S
12
ACCESSORIES
TA - Wall mounted room thermostat
Automatic regulation of the the room temperature:
- only in the heating mode working on the fan motor
assembly;
- only in the cooling mode working on the fan motor
assembly;
- both in cooling and heating mode, with remote mode
selection working on the fan motor assembly.
TA2 - Wall mounted room thermostat with summer-
winter selector
Wall mounted room thermostat with cooling/heating
mode selector.
Automatic regulation of the room temperature both in
heating and cooling mode, working on the fan motor
assembly.
CST -Delta/star selector for installation in electric panels
Allows the rotational speed switching (off / low-speed / high-speed). For
electrical box installation.
CSTP - Delta/star selector with box for wall installation
Allows the rotational speed switching (off / low-speed / high-speed).
Supplied with plastic box for wall installation.
PAE - Fresh air intake louver
Allows the fresh air intake from the outside. Usually
installed together with the outdoor fresh-air intake grill
(GR option)
GR - Outdoor air intake grille
Galvanised aluminium outdoor fresh-air intake grill.
Equipped with anti-intrusion grill, in order to avoid the
intrusion of dangerous objects from the outside.
DFP - wall mounting board
The DFP option (made in steel of adequate
thickness) allows the installation on indoor
walls. The fan heater is connected to the wall
mounting board by mean of the four tongues in
the back panel of the unit (connection screws
supplied).
DFC - column mounting board
The DFP option (made in steel of adequate
thickness) allows the installation on indoor
columns or walls . The fan heater is connected
to the wall mounting board by mean of the four
tongues in the back panel of the unit
(connection and option mounting screws
supplied).
AP66000271 - 01
DFO - Adjustable wall/column mounting
board
The DFO option (made in steel of adequate
thickness) allows to orient the fan heater as
needed (towards left or right), during the
installation on indoor columns or walls. The
fan heater is connected to the wall mounting
board by mean of the four brackets in the back
panel of the unit (connection and option
mounting screws supplied).
R - Protection grill for gymnasium
Protection grill for gymnasium (against ball
impact on adjustable louvers). Option mounting
screws supplied.
D0 - Additional row of louvers
The additional row of louvers air diffuser allows
to orient the air flow on the horizontal plane,
towards left or right. Option mounting screws
supplied.
10
All copying, even partial, of this manual is strictly forbidden