Galletti CSW 186 Teknik Kılavuz - Sayfa 2

Klima Galletti CSW 186 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Galletti CSW 186 20 sayfaları. Vk on/off 3-way motor driven valve kit
Ayrıca Galletti CSW 186 için: Kurulum ve Bakım Kılavuzu (20 sayfalar), Manuel (8 sayfalar)

Sayfayı Yazdır
Galletti CSW 186 Teknik Kılavuz
CSW
1
Constructive features ........................................................... 2
2
Constructive versions ........................................................... 2
3
Available accessories .......................................................... 2
4
Rated technical data ............................................................ 3
5
Cooling capacity .................................................................. 4
6
Heating capacity .................................................................. 6
7
Sound levels ........................................................................ 8
8
Hydraulic connections ......................................................... 8
9
Dimensions ..................................................................... 9 - 11
10
Wiring diagrams ............................................................... 12 - 16
11
Accessories ........................................................................ 17
DECLARATION OF CONFORMITY
Galletti S.p.A. hereby declares, under its sole responsibility, that
CSW water cassette series have been designed, built and tested in
conformity with the specifications of European Directives:
73/23, 89/392, 91/368, 93/44, 93/68, 98/37 e 89/336.
Bentivoglio,02/09/2005
Galletti S.p.A.
Luigi Galletti
OPERATING LIMITS
>
Thermal carrier fluid: water
>
Water temperature: + 5°C to +80°C
>
Air temperature: 5°C to +40°C
>
Supply voltage: 230 V+/-10 %
>
Max. primary fluid pressure 10 bar
The technical and dimensional data reported in this manual may be modified in view
of any product improvement.
WC66000067-REV.00
INDEX
All copying, even partial, of this manual is strictly forbidden
1
CONSTRUCTIVE FEATURES
Available in 6 models 2 pipes system , and 4 models 4 pipes system, the
water cassettes series CSW has the modularity 600x 600 and 900x900
suitable for the standard concealed installation
> HEAT EXCHANGER with high efficiency, made with copper piping and
high efficiency aluminum fins, complete with an air vacuum valve and
draining tube, connected to the auxiliary drip tray for the condensate
collection.
> Auxiliary drip tray ,supplied as a standard , collects the water regulation
valve condensation.
> ELECTRICAL MOTOR : 3 speeds with low Rpm ,and thermal protection
for the windings.
> CENTRIFUGAL FAN with backward blades extremely silent, statically
and dynamically balanced and coupled directly to the 3 speeds electric
motor.
> BEARING STRUCTURE with internal and external acoustic and thermal
insulation.
The basic unit is complete with pre-sheared holes for fresh air intake
and air ducting installation.
> CONDENSATE DRAINAGE PUMP: complete with a flow switch for the
collection of the drip tray condensation.
The drainage pump is complete with one way valve and timer to delay
the switch off, after receiving the flow switch signal to insure an
adequate drainage of the condensate present in the drip tray
> ELECTRICAL COMPONENTS:
-
Timer for the drainage pump
-
Electrical connection board to the wall mounted panel for the
automatic control of the water cassette and water regulation valve.
> ADJUSTABLE DIFFUSER. The diffusers inclination on the air outtake is
manually adjustable for all models
> FILTER : washable made of synthetic material, inserted in the intake
grilles on the front panel ,and is easy to remove for maintenance.
> OBBLIGATORY ACCESSORIES
3 ways valves with hydraulic kit for 2 pipes and/or 4 pipes systems. The
water regulation valve are 3 ways / 4 connections ,motorized On/Off , 230
V and intercept the hot and cold water after receiving the thermostat
signal .
The valves are complete with a hydraulic kit to connect it to the coil.
2
CONSTRUCTIVE VERSIONS:
CSW
water cassette with 1 heat exchanger (2 pipe system) arranged
for wire controller
CSWDF
water cassette with 2 heat exchangers (4 pipe system) arranged
for wire controller
3
AVAILABLE ACCESSORIES
> MICROPROD
Wall mounted panel with microprocessor for the automatic control and
regulation of the water cassette according to the room conditions
changing.
> SW
water probe for the microprocessor panel controls
> MICRONET
Control panel with advanced microprocessor complete with gateway
RS 485 for the ERGO system connection
> KP
power interface to manage up to 4 units with one control only.
2