2iB SC10 Kurulum ve Kullanım Kılavuzu - Sayfa 15

Kontrolör 2iB SC10 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. 2iB SC10 16 sayfaları. Single pump controller
Ayrıca 2iB SC10 için: Hızlı Başlangıç Kılavuzu (5 sayfalar)

Sayfayı Yazdır

Coil /

Address

Discrete

Address

LSB = Least Significant Bit, MSB = Most Significant Bit.

14.

Legal

14.1

Product Warranty

See Warranty information at www.2ib.com.au.

14.2

Document Subject to Change

This Document: This document and its contents are subject to change without notice.

14.3

Third Party Software Acknowledgement

FreeModbus Library: A portable Modbus implementation for Modbus ASCII/RTU.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Read Only

Description

(RO) or

Read/Write

(RW)

Window Current. The offset added to the measured current to obtain the stop current

setpoint when the Set button is pressed. Percentage with 0 decimal places 2 = 2%.

CT Current Range

0 = 100%, 1 = 50%, 2 = 25%. 3 = 12.5%

Pump Stop Current (Snore Setpoint). . Percentage with 1 decimal place. E.g. 125 =

12.5%.

Software Version Number/Date: