HighPoint RocketRAID 600L Hızlı Kurulum Kılavuzu - Sayfa 5

Bilgisayar Donanımı HighPoint RocketRAID 600L için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. HighPoint RocketRAID 600L 8 sayfaları. 6gb/s sata pci-express 2.0 raid hba
Ayrıca HighPoint RocketRAID 600L için: Hızlı Kurulum Kılavuzu (9 sayfalar)

Sayfayı Yazdır

BEEP1

PORT1 to

PORT4

Active/FAIL LED PIN connector:

This connector is one-pin connection from HBA to LED on chassis.

For detail LED connection requirement and display information,

please refer to:

http://www.highpoint-tech.com/PDF/LED_connection.pdf

Hardware Installation

Installing the RocketRAID 600L Series HBA

Note: Make sure the system is powered-off before installing the

RocketRAID 600L Series HBA.

1. Open the system chassis and locate an unused PCI-E (2.0/1.0) (x4,

x8, x16) slot or (3.0) (x16) slot.

2. Remove the PCI slot cover.

3. Gently insert the RocketRAID 600L HBA into the PCI-E slot, and

secure the bracket to the system chassis.

4. After installing the adapter, attach the hard disks or disk enclosure

to the RocketRAID 600L HBA using the SATA cables.

5. Close and secure the system chassis.

Using the RocketRAID 600L Series HBA

RocketRAID 600L HBA BIOS

After installing the RocketRAID 600L Series HBA, and powering on the

system, the adapter BIOS should post.

The BIOS will scan for devices and display information about each disk.

I2C Connector

SATA

SATA and eSATA

Connector

Alarm Buzzer

Connector

N/A

eSATA

Connector

Mini-SAS