Dynavin N7-MST2010 PRO SSS - Sayfa 5

Araç Navigasyon sistemi Dynavin N7-MST2010 PRO için çevrimiçi göz atın veya pdf SSS indirin. Dynavin N7-MST2010 PRO 5 sayfaları. Radio navigation system for ford mustang 2010-2014

Sayfayı Yazdır

FAQ FOR THE DYNAVIN N7-MST2010 PRO

FORD MUSTANG 2010-2014

IV. ADVANCED INFORMATION

27. Reboot

Just like any other electronic device or computer, sometimes things go wrong. If this happens, the first step

should always be to reboot the unit. Hold down the MENU button for 10 seconds to force a reboot and/or

push in the unlabeled reset button to the left of the MMC card slot with a paperclip.

28. CAN functions

The Dynavin radio system in the Mustang interacts extensively with the CAN bus network in the car. The

steering wheel controls, HVAC, button lighting, backup camera activation, and on/off-related functions all

work through CAN communication. If CAN communication is not present due to a hardware, software, or

settings issue, none of these CAN-related functions will work. Knowing this is helpful in troubleshooting.

29. Boot up/On/Off/Standby Modes

The Dynavin transitions from bootup to on/off to standby mode.

Boot up: The Dynavin radio has a 20-30 second boot up time which starts as soon as the unlock button is

pressed on the key fob OR a door is opened. During this boot time the screen will be dark and there will not be

any audio until the key is turned on; the unit will appear to be off, but it is in fact on. If the key is turned on

during this boot time the boot logo will be displayed.

On: Once the key is turned on, the boot up is complete, the screen and audio will turn on and the Dynavin

radio can be used normally. The unit can also be manually turned on by pushing in the volume knob even if

the car is off. It will stay on for 5 minutes and then automatically turn off.

Standby: When the key is in the off position and the door is opened, the screen will go dark and the audio will

turn off, but the unit will stay on, in standby mode, for about 5 minutes. If the car is turned back on during this

time, there will be no boot up time since the unit has not yet turned off completely. We sometimes get

contacts from customers who believe that their unit is not turning off correctly because when they check the

amperage draw or look at an aftermarket amplifier power light, they see an indication that the unit is on. But

in doing so they open the door or unlock the car inadvertently turning the head unit on. To properly check for

shutdown would require the doors be shut, the key out, and the car left alone for at least 5 minutes.

30. Firmware Updates

Periodically, Dynavin releases firmware updates to improve performance and/or add features, etc. To check

for the latest firmware update, visit us at https://dynavinnorthamerica.com/pages/firmware-updates. To

check your Dynavin's installed firmware version, go to the "Info" screen from the main menu. It will say "OS

Version" then a 4-digit # and "MST" where "MST" indicates that the car type is set to Mustang. If it says

something other than "MST" then the car type setting needs to be corrected. Please contact us for further

instructions if that is the case.

For a brief video of the N7-MST2010 PRO interface and basic features, please check out our video at:

https://youtu.be/QHMB7dRc4zg

For additional FAQ, please visit us as

https://dynavinnorthamerica.com/pages/faq

For troubleshooting, please call us at 559.486.4047 during our normal business hours. For help after hours, please

contact [email protected].