Emerson FB3000 Saha Kurulum Kılavuzu - Sayfa 4
Endüstriyel Ekipmanlar Emerson FB3000 için çevrimiçi göz atın veya pdf Saha Kurulum Kılavuzu indirin. Emerson FB3000 6 sayfaları. Remote terminal unit (rtu)
Ayrıca Emerson FB3000 için: Saha Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (14 sayfalar), Saha Kurulum Kılavuzu (18 sayfalar)
Sayfayı Yazdır
FB3000 RTU Coin Cell Battery Field Installation Guide
D301875X012
June 2021
Removing/replacing the Battery in Power Module (3PBT1)
To remove the power module:
1.
2.
3.
4.
5.
6.
Removing/replacing the Battery in CPU Module (3SBT1)
1.
2.
2
Disconnect the terminal block from the power module you want to remove.
Push a flathead screwdriver into the opening in the lower right of the power module and
rotate the handle of the screwdriver upwards to rotate the module upwards.
Note
Do not rotate the handle downwards; that may pop the cover off the power module.
Grasp the old battery and slide it out of the slot.
Safely dispose of the old battery according to local regulations.
Slide the replacement battery in. The positive (+) side with writing on it must be facing
downwards, towards the RTU when the power module is installed.
Reinstall the power module.
Remove the battery access door at the bottom of the CPU module, and the door magnet will
pull out the battery. (If this doesn't work, use your own external magnet to pull out the
battery.)
Removing the SRAM Battery
Safely dispose of the old battery according to local regulations.