HighPoint SSD7103 Kurulum Kılavuzu - Sayfa 10

Kontrolör HighPoint SSD7103 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HighPoint SSD7103 12 sayfaları. Linux ubuntu desktop 19.10
Ayrıca HighPoint SSD7103 için: Kurulum Kılavuzu (11 sayfalar), Kurulum Kılavuzu (11 sayfalar), Kurulum Kılavuzu (15 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (13 sayfalar), Kurulum Kılavuzu (11 sayfalar), Kurulum Kılavuzu (11 sayfalar), Hızlı Kurulum Kılavuzu (9 sayfalar)

Linux Ubuntu 19.10 on SSD7103 Installation Guide

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/hptnvme /x

This command will show the driver version number, physical device list and logical device

list.

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to

software is optional but recommended.

Please refer to HighPoint RAID Management Software documents for more information.

When the system updates the kernel packages, the driver module hptnvme.ko should be

built and installed manually before reboot.

Please refer to the REAME file distributed with HighPoint

on how to build and install the driver module.

If you forget to install the open linux driver before updating the kernel, the system

crash cannot enter. Please follow the steps below.

a. Press ESC when booting, until the following interface appears.

Choose "Advanced options for Ubuntu" and press Enter

controller. Installation of the management

SSD7103

open source package

- 8 -