HighPoint SSD7540 Kurulum Kılavuzu - Sayfa 11

Muhafaza HighPoint SSD7540 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HighPoint SSD7540 12 sayfaları. Using nvme raid aics with the dell precision 3930 rack workstation
Ayrıca HighPoint SSD7540 için: Hızlı Kurulum Kılavuzu (9 sayfalar), Kurulum Kılavuzu (15 sayfalar), Kurulum Kılavuzu (13 sayfalar), Kurulum Kılavuzu (14 sayfalar), Kurulum Kılavuzu (16 sayfalar), Hızlı Kurulum Kılavuzu (11 sayfalar), Kurulum Kılavuzu (19 sayfalar), Hızlı Kurulum Kılavuzu (6 sayfalar), Manuel Kullanım (19 sayfalar)

SSD7540 Linux CentOS7.8 Installation Guide

Using the following command to show driver status:

# cat /proc/scsi/hptnvme /x

This command will show the driver version number, physical device list and logical device

list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to SSD7540 controller.

Please refer to HighPoint RAID Management Software documents for more information.

If you do not install the system or update the kernel according to the installation manual,

the system will crash and you will not be able to enter. Please follow the steps below.

Select the default kernel (3.10.0-1127.el7.x86_64)and enter the system.

Install Linux open source driver. Run the .bin file to install the driver package.

Linux open source driver link, open the following link to enter the "Software

Download" page to download:

https://highpoint-tech.com/USA_new/series-ssd7540-overview.htm

# sh hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin

The driver installation is complete, and the reboot can enter the system where the new

kernel is located.

- 9 -