DD HAMMOCKS Ultralight Hammock Stand Talimatlar - Sayfa 5
Hamaklar DD HAMMOCKS Ultralight Hammock Stand için çevrimiçi göz atın veya pdf Talimatlar indirin. DD HAMMOCKS Ultralight Hammock Stand 5 sayfaları.
Sayfayı YazdırErecting the hammock and getting in
5
Before putting up your Ultralight Hammock Stand - ensure all the
pegged down and the guylines are securely fastened around the pegs.
Hammock ring
Guylines
5
Hammock
suspension loop
Step 1
Attach your hammock to the hammock suspension
loop
(the one attached to metal ring) on both
6
sides. You can use webbing, soft shackle or metal
karabiners to do so.
Step 3
Fit the hammock ring
strut.
Step 5
Carefully settle the hammock by applying weight
onto it with your hands.
To get in:
Crouch over the hammock, sitting into it like a chair. Slowly apply your weight until seated, then swing
your legs in.
Don't suspend your hammock at too
!
flat an angle: this will increase the force
applied to the hammock and stand.
Ensure the hamock is hanging at approx.
30
angle (you might need to adjust the
o
suspension to achieve this).
Tips and tricks
6
a
Removing the ground plates: Loosen each peg one at a time and pull them out of the ground.
b
Keeping ground plates in place: Frequent exit / re-entry to the hammock may disturb the position of
the strut ground plates. You can secure their position with a standard tent peg to stop them from
moving.
7
Hammock
webbing
6
over the top of the
7
guyline ground plates
Step 2
With the ball / toggle facing upwards, insert the
bottom of the strut
1
Step 4
Do the same on the other end.
Step 6
Check the pegs are secure before getting in.
approx. 30
o
are firmly
4
into the strut ground plate.