adeptus 10018 Montaj Talimatları Kılavuzu - Sayfa 7

Dış Mekan Arabası adeptus 10018 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. adeptus 10018 7 sayfaları. 6 drawer roll cart

INSERT DRAWERS AND COMPLETE ASSEMBLY

• THE DRAWER SIDES (PART 8) HAVE A CHANNEL

THROUGH THE MIDDLE OF THE PART. THIS CHANNEL

SLIDES OVER THE DRAWER RUNNERS (PART D).

• SLIDE ALL DRAWERS IN.

AND CHECK THE DRAWERS RUN SMOOTH.

ONE DRAWER FRONT SHOULD NOT OVERLAP ANOTHER

DRAWER FRONT EDGE.

IF THERE IS A PROBLEM, IT IS LIKELY THE DRAWER FRONT IS

NOT ASSEMBLED LEVEL. SIMPLY BACK OUT ONE SET OF THE

SCREWS ON A DRAWER SIDE (PART 8) AND ADJUST UNTIL IT IS

TO YOUR SATISFACTION.

(REMEMBER TO LINE THE BOTTOM EDGES OF THE DRAWER

SIDE (PART 8) AND DRAWER FRONT (PART 11) UP.)

• STEP BACK TO LOOK AT THE UNIT. YOU MAY PREFER TO

MOVE ONE DRAWER TO ANOTHER´S POSITION.

THANK YOU FOR YOUR PURCHASE, AND WELCOME TO ADEPTUS!

USE AND CARE INSTRUCTIONS:

• NORMAL USE: WIPE WITH A CLEAN CLOTH.

• OR WHEN NEEDED TO CLEAN SCUFFS:WIPE CLEAN WITH A SLIGHTLY DAMP CLOTH AND A MILD CLEANER. THEN

WIPE DRY WITH A CLEAN CLOTH.

USE:

MULTI-PURPOSE MOBILE STORAGE UNIT FOR HOME, OFFICE, CRAFT ROOM, KITCHEN, OR GARAGE.

NOTICE:

COMPLETED ASSEMBLY:

CONTAINED

7-07