HighPoint RocketStor 3112C Hızlı Kurulum Kılavuzu - Sayfa 6

Yerleştirme İstasyonu HighPoint RocketStor 3112C için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. HighPoint RocketStor 3112C 8 sayfaları. 2-bay usb 3.1 drive dock

Sayfayı Yazdır

SATA Drives Installation and Ejecting

The RocketStor 3112C supports 1 or 2 disk configurations of 2.5" and

3.5" SATA storage devices of any performance level and capacity.

Installing a Device - Carefully align the SATA device's gold fingers

with the bay's SATA connector. Gently push the device straight down

until secure.

Ejecting a Device - Hold the

base of the RocketStor device

and press the Eject Button.

Gently remove the drive by

pulling straight upwards.

Note: The surface temperature of some 3.5" hard disks may exceed 50

degrees C after extended use - approach with caution. Carefully

assess the surface temperature of any hard disk before removal. If you

suspect the temperature is too high, please power down the target

drive using the bay's independent power button. Allow the drive to

cool for several minutes before removal.