ADESCO MQ03 LTE-M Kurulum ve Yapılandırma Kılavuzu - Sayfa 3

Cep Telefonu ADESCO MQ03 LTE-M için çevrimiçi göz atın veya pdf Kurulum ve Yapılandırma Kılavuzu indirin. ADESCO MQ03 LTE-M 11 sayfaları. Global sim universal communicators

Sayfayı Yazdır

Safety Instructions.

Limited Liability and Manufacturer Warranty

Please read and follow these safety instructions in order to maintain safety of operators and people around:

GSM/GPRS communicators MQ03 (the Device) contain a radio transceiver operating in GSM 850/900/ 1800/1900 bands.



Do not use the Device with medical devices, or where it can interfere with other devices and cause any potential danger.



Do not expose the Device to high humidity, chemical environment or mechanical impacts.



Do not use the Device in hazardous environment. Don't store or install the Device in overheated, dusty, wet or overcooled places.



The Device is mounted in limited access areas. Any system repairs must be done only by qualiﬁed, safety aware personnel. Don't



disassemble or reﬁt the Device. Do not attempt to personally repair it.

Mains power must be disconnected before any installation or tuning work starts. The device installation or maintenance must not be



done during stormy conditions.

The device must be powered by DC 7-18V, 400mA power supply.



Blown fuses or any other components of the Device must not be replaced by the user.



Keep the Device dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.



Handle carefully. Don't vibrate or shake it violently.



Clear the Device with a piece of dry cloth. Don't clean in chemicals, detergent.



Please read the user manual carefully before installation and operation of the Device. Otherwise, it may not work properly or be



destroyed.

Limited Liability:

The user agrees that despite the Device could reduce the risk of ﬁre, theft, burglary or other dangers, it does not guarantee

against such events.

ADESCO.

responsibility according to local laws does not exceed value of the purchased system.

cellular services, therefore is not responsible for network services, coverage or its operation.

Manufacturer Warranty:

warranty does not cover any postal or labor costs for the removal and reinstallation of the Device. This warranty does not cover any subscriber

agreements or failure of services provided under the terms of such subscriber agreements, or failure of cellular, GPRS, LAN or other related

networks functions and services. The warranty does not apply to any Device that has been modiﬁed or used in a manner contrary to its intended

purpose and does not cover damage to the Device caused by installation or removal of the Device or any of its components. This warranty is

voided if the Device has been damaged by improper maintenance, SIM card removal, accident or unreasonable use, negligence, acts of God,

neglect, improper service or other causes not arising out of defect in materials or construction. This warranty does not cover the elimination of

externally generated static or noise, or the correction of antenna problems or weak signal reception, damage to software, accessories or alarm

system external components, cosmetic damage or damage due to negligence, misuse, abuse, failure to follow operating instructions, accidental

spills or customer applied cleaners, damage due to environmental causes such as ﬂoods, airborne fallout, chemicals, salt, hail, windstorms,

moisture, lightning or extreme temperatures, damage due to ﬁre, theft, loss or vandalism, damage due to improper storage and connection to

equipment of another manufacturer, modiﬁcation of existing equipment, faulty installation or short circuit. In no event will

any incidental, special or consequential damages (including loss of proﬁts), and the Client shall have no claim against

contracts, indemniﬁcation, compensation for loss of customers, loss of proﬁts, prospective proﬁts, distribution rights , market share, goodwill,

investments made or any similar losses that may result from any faults in the operation of the Device and the services provided by

General operating principles of MQ03 GSM/GPRS communicators

This communication solution is a complete communication platform for data transfer from alarm systems at remote sites to Central Monitoring

Stations (CMS) or end-user equipment (smart phones, tablets, PCs, and etc.). The platform allows bi-directional data transmission by using GPRS

network and SMS messaging. The platform consists of hardware devices (such as MQ03 GSM/GPRS communicators) and Cloud Infrastructure

Service (CIS). The CIS can be provided and supported either by

and any security alarm system is via digital inputs, serial port, or telephone line emulation with DTMF decoding. The GSM/GPRS communicators

MQ03 maintain permanent connection to the Cloud Infrastructure Service. The CIS performs several administrative tasks, such as to constantly

monitor the connections with all Devices; to send commands and queries to the Devices in real time (e.g. to retrieve the GSM signal level or the

mains power voltage); to perform device conﬁguration tasks and remote ﬁrmware updates; to distribute the alarm events to diﬀerent end-user

equipment and/or to CMS; and etc. In a scenario when the alarm system is monitored by a CMS, the CIS receives all events from the Device,

buﬀers them and forwards them to the monitoring station using a protocol and interface that are supported by the monitoring station. The CIS

can emulate some of the most popular hardware receivers' protocols, such as Sur-Gard MLR2, DC09 (SIA over IP), VISONIC, KP Electronics etc. In

this way, diﬀerent monitoring station software programs are supported.

The administrative access to conﬁguration settings and service commands can be done through a web based software at

https://m2m.adesco.gr/admin

administrative accounts with diﬀerent permissions. For example, it can be specified that some users can only view communicator statuses and

check the signal level without being able to change alarm conﬁguration settings.

Key features and beneﬁts

High reliability due to multiple transmission channels (GPRS/SMS/GSM/PSTN) and redundant servers;

Connection monitoring – adjustable fault reporting time as low as 20 seconds.

Jamming detection – triggers notiﬁcation through the alternative channel or activation of a digital output.

Support of any security alarm system through digital inputs, serial port or telephone line emulation and DTMF decoding.

Software-based receiver that emulates various hardware receiver protocols (Sur-Gard MLR2, DC09, Visonic RC4000, etc.).

Web-based software and smartphone app for devices conﬁguration and administration. Remote ﬁrmware updates.

Remote servicing – virtual serial port to the alarm panel allowing remote programming with the panel manufacturer's software.

GSM/GPRS Communicator MQ03 Installer Manual Version 1.1

will not take any responsibility regarding personal, property or revenue loss while using the Device.

The Device carries a non-transferable hardware limited warranty by the manufacturer

or through Android app 'RControl Admin' (available free of charge at GooglePlay). The user can create diﬀerent

ADESCO.

or by its authorized local partners. The connection between the Device

is not aﬃliated with GSM operators providing

M2M / ADESCO.

ADESCO.

for termination of

page 3 of 11

ADESCO.

This

be liable for

ADESCO.