STATUS INDICATOR LIGHTS
The WASHING light comes on at the beginning of cycle and
remains on until the end of the main wash.
The DRYING light indicates the drying portion of the cycle.
The light will come on when either drying option is
selected.
When the SANITIZE option is selected, the SANITIZED light
will glow when the SANITIZE cycle is finished and remain
on until the door is opened. If the dishwasher did not
properly sanitize the dishes, the light will not come on. This
can happen if the cycle is interrupted or if incoming water
temperture is below 120
The CLEAN light will come on at end of cycle and remain on
until door is opened.
The RINSING AGENT LOW light, Located near the
Rinse Only Pad, comes on at the end of a cleaning cycle
when the rinse agent reservoir is low. The light will remain
on through 5 successive cycles or until the reservoir is
filled.
NOTE
The time remaining could suddenly increase or drop
several minutes. This means the iSense Soil Sensor has
checked the soil level and determined if additional water
fills are needed or if water fills can be deleted.
4
heavy
quick
normal
china
wash
clean
wash
crystal
F.
o
top
energy
rinse
rack
saver
only
add rinse aid
delay
clean
s
washing
drying
In the unlikely event the dishwasher malfunctions, the indicator
may display one of the following codes "Er", "uF", "uo", or
"CE". If one of these codes are displayed contact the
Frigidaire Customer Care Center at 1-800-944-9044 They
will be able to provide assistance in troubleshooting the
problem and/or locating an authorized service technician, if
needed.
PF..................
1H-24H...........
CL..................
HO or Hd...........
MINUTES.........
NOTE
The dishwasher is programmed to remember your last cycle
so you do not have to reset each time. To start the
dishwasher using the same cycle and options selected on
the previous wash, just press the START/CANCEL pad.
air
hi temp
delay
START
sanitize
dry
wash
start
cancel
hold to lock
1-24 hrs
Press the CIRCLE to activate
Appears in window when dishwasher
is first installed, or when power has
been interrupted. HI-TEMP WASH and
NO HEAT DRY indicator lights will also
flash. To clear, touch START/CANCEL
pad.
Number of delay start hours. The last
hour will count down in minutes.
Close dishwasher door. The status
indicator lights will also flash to
indicate current cycle status.
Indicate a water heat delay.
Number of minutes left in cycle (1-99).
If cycle is longer than 99 minutes, a
small plus sign will appear beside the
number of minutes and remain on
until time counts below 99.
Sayfayı Yazdır