AFL MFT Hızlı Referans Kılavuzu - Sayfa 2
Test Ekipmanları AFL MFT için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. AFL MFT 17 sayfaları. Multi-fiber identification system
Sayfayı Yazdır
Power Button provides two functions
1
1
as follows:
– Press and release the Power button to turn
the MFI identifier On or Off (optionally
pull the trigger to activate the MFI). MFI
automatically turns Off after four (4)
minutes of inactivity.
– Press and hold the Power button during
power up until the letter "P" is displayed to
disable the Auto Off feature.
Note: MFI identifier will stay powered up
until the Power button is pressed to turn
it Off.
2
Signal Detect Indicators. If valid signal
2
detected, both lights will flash and beeper
will sound once every 3 seconds.
3
No ID Indicator illuminates to indicate
3
absence of a valid optical signal.
Backlight Button. When the MFI identifier
4
4
is turned On, press this button to toggle the
Backlight feature On or Off.
LCD Display
5
5
– The Battery icon appears on the MFI
display to indicate a "low battery"
condition. The discharged alkaline batteries
require replacement
– Will display Fiber Number if detected
– Will display "- - -" if no signal. (No signal
LED will illuminate as well).
MFI Controls and Interfaces
2
2
5
888
2
No
ID
3
4
1
MFI